What should I look for in a new construction deficiency walk thru?

When you are buying a newly constructed home, be it an apartment, townhome, half-duplex or detached property most likely in your agreement to purchase you will have an agreement that you have an opportunity to visit the property prior to completion of the sale with the builder or a representative of the builder to check on the condition of the home and note any defects that are to be fixed by the builder. This is typically call a deficiency walk thru.

You may wonder what you should look for during a deficiency walk thru?
Many of the obvious items you will notice, for example, if you agreed the property was to be x color outside and the color is not correct, or you asked for certain appliances and the are not present but what about the details?

Here is a sample but not exhaustive checklist to help you frame your deficiency walk thru visit. ( I put together this checklist if you would like a printout of this checklist contact me here)

Note: when you start the deficiency walk through one of the best ideas is visit space by space and review and make notes and have your real estate agent or the developers agent make a list that you are going to review and agree to at the end of the deficiency walk thru.

Kitchen and Bathrooms (and other rooms that contain similar items)
Countertops and surfaces: check for scratches, chips, rough or unfinished edges on tile, stone, laminate or other surfaces.

Cabinets, pantry, closets  and drawers: open and close every unit to test soft close features or just to test they close evenly, check handles and alignment.

Plumbing fixtures: run water in sinks, showers, and tubs to check pressure and to see if stoppers work. Test hot and cold water mixing. Flush each toilet to make sure they fill properly and check the bases and edges are caulked.

All rooms:
Walls, ceilings and Paint:
Drywall and baseboards and trim: look closely for dents, nail pops, or cracks in corners and patches where paint is missing.

Paint finish: look for missed spots, uneven coverage, rough surfaces, paint drips, excess paint touch ups visible under different lighting. Note: make sure you get a detailed list of the paints used in the home so you know the right paint for future touch ups.

Doors, Windows and Floors:
Doors and locks are often over looked. Open and close each interior and exterior door to confirm it swings correctly, latches securely and make sure the locks work. Make sure you get keys for all the locking doors.

Windows and window seals: Test how windows open and slide to test hardware and look for broken/scratched glass, dents in frames, missing sealant/caulking. Check also the operation of any blinds and window coverings that are included.

Flooring: walk across all floor areas to check for loose carpets seams, bubbles or rolls in the carpet where it was not properly stretched, check for movement in subfloors, scratches and chips in tiles, laminate and other flooring. Check for eveness of flooring.

Electrical system:
Outlets and switches: test each light switch and plug in outlet to make sure they work. Bring a bulb with you just in case and a testing device you will need to check outlets. Sometimes the electrician will have missed a connection of a wire so do not assume all is working. Make sure you check the ground fault circuit interrupter outlets in wet areas (make sure they are present and working).

Appliances: test the stove, oven, dishwasher, fridge, microwave to endure they turn on and heat or cycle properly.

Ventilation: turn on the bathroom and kitchen exhaust fans to verify they activate and vent air.

Garage: test that the garage door opens smoothly and that the remotes and non remote switches work.

Smoke alarms and carbon monoxide alarms: make sure they are functioning and if included the sprinkler system are in proper working order.

Air conditioning, heat pumps, hot water tank and hot water on demand: confirm they are all working.

This is not an exhaustive list but it is a base of reminders.
I have done deficiency list walk throughs with clients and they start to just walk through and do not look for the details and when I point out the details they are very happy I did. Remember it is much easier to have the repair noted and done by the builder whenever possible before you move in than having to chase after a builder after you move in to do some fixing up or get repairs done like painting when you have all your personal items in place.

This checklist can also be valuable for you to use if you are buying a pre owned home although your right to have repairs fixed may be limited.

If you have additional questions, you can also learn more by contacting myself as a licensed real estate agent in BC.

Start searching for your next home here

***

If you are planning on selling or buying real estate I welcome your inquiry to help you learn more about the current market. You can contact me here.

You can also read about my services and what people say about my work here

I also publish an educational ezine. Contact me here to become a subscriber at no charge.

At your service, David Hennessey

David Hennessey
Full Time Licensed REALTOR®
Graduate of the REBI real estate negotiation expert course
eXp Realty
604 626 8903

 

Start searching for your next home here

Note: This article is for educational purposes only and its content is not guaranteed to be up to date after the date published. Please consult with a licensed real estate agent such as myself directly to be up to date.

Note: This communication is not intended to cause or induce breach of an existing agency agreement.

You cannot copy content of this page